Altronix ACM8CB Access Power Controller

Description

Altronix Model Number	No. Of Outputs	Fuse Protected Outputs	PTC Protected Auto-Resettable Outputs	Output Ratings
ACM8	8	Yes	No	3.5A
ACM8CB	8	No	Yes	2.5A

 

Altronix ACM8 and ACM8CB UL Listed Sub-Assembly multi-output Access Power Controllers convert one (1) 12 to
24 volt DC input into eight (8) independently controlled fused or PTC protected outputs.

These power outputs can be converted to dry form “C” contacts (fused models only). Outputs are activated by an open
collector sink or normally open [NO] dry trigger input from an Access Control System, Card Reader, Keypad,
Push Button, PIR, etc.

The units will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes,
Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.

Units are designed to be powered by one common power source which will provide power for both the board operation
and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and
the other for lock / accessory power.

The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary
devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

 

Input
Voltage:
12 to 24 VAC or VDC operation (setting not required),
0.6A @ 12V, 0.3A @ 24V current consumption
with all relays energized
Main fuse is rated at 10/250VA

Trigger Inputs:
Eight (8) Access Control System trigger inputs:
a) Eight (8) normally open (NO) inputs
b) Eight (8) open collector sink inputs
c) Any combination of the above

Input Options:
a) One (1) common power input (board and lock power)
b) Two (2) isolated power inputs (one (1) for board power
and one (1) for lock/accessory power)

 

Outputs
Eight (8) independently controlled 2.5A outputs:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs
b) Eight (8) dry form “C” 5A rated relay outputs.
c) Any combination of the aboveEight (8) auxiliary power outputs (unswitched)

Output ratings:
– Fuses are rated 3.5A each.
– PTCs are rated 2.5A each.
Note: Total output current is determined by the power supply,
not to exceed a maximum of 10A total

 

Indicators (LED)
Red LEDs Outputs are triggered (relays energized)
Green LED FACP disconnect is triggered